Port Barrel Instructions

Port Barrel

Please read the instructions carefully to get the best results from your American Oak Port Barrel Preparing the barrel: (please read carefully) Important Note: Never immerse the barrel in water as this will turn it black.

  • Fill the barrel with water as the barrel has been empty since manufacture and the oak could have dried out.
  • If the barrel leaks, leave the water in it for the oak to “take up” moisture and stop the leaking. Do not keep the water in the barrels for longer than four days
  • Remember that patience is necessary at this stage and is the key to successfully preparing the barrel.
  • Empty the barrel and let it drain completely.
  • Pour into the barrel a quarter of a bottle of Old Tawny Port, roll it around several times and empty it out.
  • Fill the barrel with the port you have selected or blended.
  • If the barrel still leaks, empty the wine out, refill it with water and leave until the leaking stops. In most instances this will not be necessary.
Wine storage

Suggested port blends:

Dry, Fairly Alcoholic Style:

  • Three and a half bottle of Tawny Port
  • One bottle of Fino Sherry (Very Dry)
  • One bottle of St. Agnes Brandy (375 ml)

Sweeter Less Alcohol Style:

  • Four bottles of Tawny Port
  • Half a bottle of Fino Sherry (Very Dry)
  • One bottle of St Agnes Brandy (175 ml)

Note :

  • The blend can be sized up or down depending on taste and the volume of the barrel, which does not have to be full.
  • The blend will take tome to “marry in” and provide a smooth drinking Port. Some evaporation of the contents should be encouraged, as this hastens the “marrying in”.
  • You should also try other blends such as specialised liqueurs, spirits and other suitable liquors.

0 comments on “Port Barrel Instructions

Leave a Reply

Your email address will not be published. Required fields are marked *

Cart Item Removed. Undo
  • No products in the cart.